But these innovative ways to hang curtains are certainly less permanent and less drilling (for some, not all), and less traditional.
#EASY CURTAIN BRACKETS SERIAL#
Serial re-decorators, new homeowners, and renters alike can all use these 21 creative ways to hang curtains without a curtain rod. I truly appreciate you taking my suggestions and using my links. All opinions and recommendations are my own. Before taking any actions, consult a professional! Additionally, this may contain affiliate links where I receive a small commission if you make a purchase using my link.
#EASY CURTAIN BRACKETS PROFESSIONAL#
This article is for general information use and is not a substitute for professional advice. Now, you know why you want to hang curtains, but how? Traditional curtain rods are great unless you can’t muck up the wall or want more creative ways to put up your window treatments.ĭisclaimer: Please remember that I am a DIY enthusiast, not a professional. Who knew hanging a piece of fabric at the side of the window could do so much? They also bring extraordinary warmth, texture, and color to the space.
When hung correctly, they make your ceilings appear sky-high. Touch up any paint or stain, on the ends, as needed.Are you looking for diy hanging curtains without rods ideas?Ĭurtains are one of the most affordable ways to dress up a room. Once both brackets are hung, measure and cut your rod.I also used a level to make sure that tape was straight before putting the anchors in the wall. I used the line marking the top of my bracket as a guide for hanging. I knew I wanted my DIY Wooden Curtain Rod brackets 4″ below the crown. To hang the brackets, use painter’s tape to mark the top of the bracket and where each screw hole should be.Apply a polyurethane to protect the finish. Then apply Wood Conditioner, to prep for stain. If staining, you will need a to completely sand with 150-grit sandpaper. If painting, lightly sand the brackets and rod.Wipe away any excess glue with a clean, damp cloth.Glue and clamp and/or nail the sockets to the brackets.I tested that I could lift the rod in and out of place before deciding where I wanted my socket. Mark the placement of the sockets on the brackets.
#EASY CURTAIN BRACKETS PATCH#
You don’t want to have to buy a new rod, or patch holes in your wall if the rod is too short. This is how you can be sure to get a perfectly snug fit with the rod. AND do not cut the rod until you have hung the brackets on the wall.
I just used the brad nailer so that I could move on to painting without waiting.Īctually, I should have just used my DAP Rapid Fuse to glue these pieces together. BUT, if you don’t have a brad nailer, you could glue, clamp, and let the pieces dry before painting. You don’t want to have to buy a new rod, or patch holes in your wall if the rod is too short.ĭesign Note: I used glue and a brad nail for assembly. You can easily make sure you get 2 identical cuts, by clamping a scrap piece of wood to the saw. Step Oneĭecide on best bracket size and design for your space. I just used the brad nailer so that I could move on to painting without waiting.Īctually, I should have just used my DAP Rapid Fuse to glue these pieces together.
Design Note: I used glue and a brad nail for assembly.
0 kommentar(er)
